
Add to Cart
Composition
1. Lithium battery into capacity sharing equipment.
2. Computer with USB interface (self provided).
3. USB to 485 interface converter and conmmunication line.
4. Battery scanning system.
5. Software.
Working power | Three-phase five-wire system AC380V±10%, 50HZ | ||
Work environment | Temperature 0-40 degrees, relative humidity ≤80% | ||
Heat dissipation | to enter the air naturally and exhaust the air upward | ||
Overall energy saving | over 70% | ||
Channel Parameter | |||
Voltage measuring range | 0-5V, 1MV resolution | ||
Battery voltage range | Charge 0-4.5V: Discharge 4.5-2V | ||
Constant voltage range | 2.5V-4.5V | ||
voltage accuracy | ±(1‰ reading +1‰ full) | ||
Current accuracy | ±(1‰ reading +1‰ full) | ||
Software Function | |||
Control mode | Computer connection equipment work, FCL control | ||
Communication mode | RS485 baud rate 57,600 | ||
Process set | A maximum of 32 work steps and 256 cycles are se | ||
Charging mode | Constant current, constant pressure | ||
Charging cutoff condition | Voltage, current, time, capacity | ||
Discharge | constant current | ||
Discharge cut-off condition | Voltage, time, capacity | ||
Defensive function | Overvoltage, undervoltage, overcurrent, undercurrent, overcapacity, etc | ||
Time range | Set it anywhere from 0 to 30,000 minutes | ||
Time accuracy | ≤±1‰ | ||
Sampling inspection period | ≤3S | ||
Minimum frequency of data recording | ≤5S | ||
Battery sorting | By capacity, time, discharge platform, etc | ||
Data processing | Data, graphs, and loop diagrams |
XWELL can provide different fixtures for different types of cells