Guangdong XWELL New Energy Technology CO., LTD.
Guangdong XWELL Technology CO., LTD.
Add to Cart
Li Ion Battery PCB Battery Management System Tester 24s BMS Protection Board Testing Machine For Lithium Battery Pack
This machine is designed for test protecting voltage of over charge, recovery voltage of over charge, protecting voltage of over discharge, recovery voltage of over discharge, protecting current of over current, delayed performance of over current protecting total current self consumption 1~32 series power battery protection board tester
Features:
1, Short circuit protection test
2, Self consumption of each PCB board test
3, Equalizing current and balance voltage test
Specification
| Parameter | Test Range | Accuracy |
| Number of Testing Series | 1-6 series optional | |
| Voltage Reference | Ternary Battery:3.8V Lithium Battery: 3V | |
| Overcharge/Overdischarge Protection Voltage | 0.5-5V | ±5mV |
| Overcharge/Overdischarge Voltage | 0.5-5V | ±5mV |
| Overcharge Protection Current | 0-50A | ±0.1A |
| Over-discharge Protection Current | 0-120A | ±0.1A |
| Equilibrium Open Voltage | 0.5-5V | ±5mV |
| Equilibrium Real-time Current | 0-200mA | ±1mA |
| Overcurrent Protection Delay | 0-15S | ±1mS |
| Overcharge/Overdischarge Protection Delay | 0-20S | ±1mS |
| Single-section Self-consuming Power | 0-500uA | ±1uA |
| Internal Loop Resistance | 0-500mΩ | ±1mΩ |
| Short Circuit Protection (more than 6 series) | 0-9999us | ±1us |
| Supply Voltage | 220VAC | |
| Maximum Power | 600W | |
| Current Level | 60-120A | |
| Machine Size | 420*430*220mm |
Detail
